33 32 681 Replacing a rubber mount in the lower wishbone (wishbone removed)

Special tools required: 

• 33 3 351
• 33 3 352
• 33 3 353
• 33 3 354

Insert special tool 33 3 354 between the two wishbone arms.

Press rubber mount with special tools 33 3 351 and 33 3 352 out of the lower wishbone.

Fig 1: Pressing Out Rubber Mount Using Special Tools (33 3 351) And (33 3 352)

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 33 3 354 between the two wishbone arms.

Press in the new rubber mount (1) with special tools 33 3 351 and 33 3 353.

Fig 2: Pressing In Rubber Mount Using Special Tools (33 3 351) And (33 3 353)

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: 

• Perform CHASSIS/WHEEL ALIGNMENT CHECK