11 00 Mounting engine on assembly stand (N54)
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 2 300
- 11 8 541
- 11 8 542
See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
See ENGINE - SPECIAL TOOLS (N54, N63) .
IMPORTANT:
Aluminum screws/bolts must be replaced each time they are released.
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage).
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage).
Necessary preliminary tasks:
- Remove engine .
Mount engine with special tool 11 8 541 on special tool 00 2 300 .
Mount engine or engine block with special tool 11 8 542 to 11 8 541 .