65 83 570 Removing and installing/replacing CD drive for Car Communication Computer

Special tools required:

12 7 192

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
Risk of damage!
Place Car Communication Computer on special tool 12 7 192 (antistatic mat) and earth/ground.

Necessary preliminary tasks:

Remove front trim holder for Car Communication Computer , see 65 83 565 Removing and installing/replacing front trim for Car Communication Computer (holder) .

Release screws (1), remove CD drive and place to one side.

Installation:

Ensure correct routing of cables.

Fig 1: Identifying CD Drive And Screws

G04792774

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove cover (2) from CD drive.

Fig 2: Identifying CD Drive, Cover And Screws

G06213924

Courtesy of BMW OF NORTH AMERICA, INC.

Cut through warranty seal (1) at marked point.

Release screw (2).

Lift side cover out of mounting (3) and carefully place to one side.

Fig 3: Identifying Warranty Seal And Mounting

G04753759

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove CD drive.

Installation:

Ensure correct routing of cables.

Fig 4: Identifying Plug Connection And CD Drive

G04753760

Courtesy of BMW OF NORTH AMERICA, INC.