65 83 565 Removing and installing/replacing front trim for Car Communication Computer (holder)

Special tools required:

12 7 192

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
Risk of damage!
Place Car Communication Computer on special tool 12 7 192 (antistatic mat) and earth/ground.

Necessary preliminary tasks:

Remove front trim for Car Communication Computer , see 65 83 560 Removing and installing/replacing front trim for Car Communication Computer .

Release screws (1) and remove holder (2).

Installation:

Retaining pin (1) must be adapted to fit in guide hole (2).

Fig 1: Identifying Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Identifying Pin And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guide tabs (1) must be correctly inserted in front trim holder.

Fig 3: Identifying Guide Tabs In Front Trim Holder

Courtesy of BMW OF NORTH AMERICA, INC.