65 50... Removing and installing/replacing IR board for rear cabin monitor

Necessary preliminary tasks: 

• Remove trim for rear cabin at front and rear base  , see 65 50 150 Removing and installing/replacing trim for rear cabin monitor base at front and rear .

Release electric cable (1) from guides.

Installation: 

Ensure correct cable routing.

Fig 1: Releasing Electric Cable From Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove IR board and disconnect associated plug connection.

Fig 2: Identifying Associated Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.