65 50 150 Removing and installing/replacing trim for rear cabin monitor base at front and rear

Special tools required: 

• 00 9 340  , see 00 9 340 DISASSEMBLY AID (2 PIECES) .

Using special tool 00 9 340  , unclip trim (1) on both sides.

Fig 1: Identifying Rear Cabin Monitor Base And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim (1) for base at front with special tool 00 9 340  and remove.

Fig 2: Identifying Rear Cabin Monitor Base Trim Location

Courtesy of BMW OF NORTH AMERICA, INC.

Open armrest (1).

Unclip trim (2) for base at rear with special tool 00 9 340  and feed out.

Fig 3: Identifying Armrest And Trim Location

Courtesy of BMW OF NORTH AMERICA, INC.