65 50 170 Replacing the cover for the Central Information Display (CID) (up to 10/2009)

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION ).

Necessary preliminary work:

Carefully release latch mechanisms (1).

Installation note: Latch mechanisms (1) must not be damaged.

Fig 1: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise cover (2).

Disconnect plug connection (1) and remove cover (2) from CID.

Fig 2: Identifying Plug Connection With Raise Trim

Courtesy of BMW OF NORTH AMERICA, INC.