LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag, Audio, Navigation And Anti-Theft - Repair >> Video And TV Equipment >> 65 50 057 Removing and installing replacing central information display (CID)

65 50 057 Removing and installing replacing central information display (CID)

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection)  , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks: 

Release screws (1) and feed out CID (2) towards bottom.

Tightening torque 65 50 1AZ  , see 65 50 CENTRAL INFORMATION DISPLAY (CID) .

Fig 1: Identifying CID And Screws
G04792737Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and unclip cable from holders (2).

Remove CID (3).

Installation: 

Holders (2) must not be damaged!

Make sure cable is correctly routed through holders (2).

Fig 2: Identifying Holder, CID And Screws
G04792738Courtesy of BMW OF NORTH AMERICA, INC.