11 14 250 Removing and installing/sealing rear coolant end cover (N63)

Special tools required: 

• 11 4 470 

See ENGINE - SPECIAL TOOLS (N54, N63) .

Recycling: 

Catch and dispose of drained coolant in a suitable container.

Observe country-specific waste-disposal regulations.

Necessary preliminary tasks: 

• Remove flywheel  
• Drain coolant  . See 17 00 008 DRAINING AND ADDING COOLANT IN RADIATOR (N62TU, N63) .

Release all screws in area (1).

Tightening torque 11 14 5AZ, see 11 14 CASE COVERS

Remove end cover.

Fig 1: Release All Screws In Area (1)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Replace profile seal (1)  .

Fig 2: Identifying Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.