11 22 000 Removing and installing/replacing flywheel (N63)
WARNING: This page is about a different variant/trim than selected.
Special tools required:
- 11 9 260
See ENGINE - SPECIAL TOOLS (N54, N63) .
Necessary preliminary tasks:
- Remove automatic transmission
- Remove manual transmission
- Remove clutch
Locate flywheel (1) with special tool 11 9 260.
Release flywheel screws in area (1).
Remove flywheel (2).
Installation:
Clean threads on flywheel screws in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws .
Tightening torque 11 22 1AZ, see 11 22 FLYWHEEL