72 11 092 Removing and installing/replacing rear left or right seat belt

Necessary preliminary tasks

Release screw (1) on end fitting.

Installation:

Replace screw.

Tightening torque 72 11 21AZ .

Fig 1: Identifying Rear Left Or Right Seat Belt End Fitting Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Installation:

Replace screws.

Tightening torque 72 11 24AZ .

Remove belt deflector (2).

Release screws (3).

Tightening torque 72 11 23AZ .

Remove deflector bar (4).

Fig 2: Identifying Belt Deflector, Deflector Bar And Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Installation:

Replace screws.

Tightening torque 72 11 20AZ .

Remove automatic reel (2).

Installation:

Inertia reel unit is coded against incorrect installation (2).

Fig 3: Identifying Automatic Reel And Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.