51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left

Special tools required:

Necessary preliminary tasks

Detach edge protection (1) in area of footwell trim.

Release screw (2) and remove release lever (3).

Fig 1: Removing Release Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Unclamp clamps (2) with special tool 00 9 317 .

Remove trim panel (3) towards inside.

Fig 2: Removing Trim Panel Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

clamps (1) on trim panel (2) must not be damaged.

Fig 3: Identifying Trim Panel And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.