51 47 143 Removing and installing/replacing panel for passenger compartment partition

Necessary preliminary tasks:

Version with ski bag:

Pull off cover (1) downwards.

Unclip trims (2).

Release screw (3) and clips (4).

Fig 1: Identifying Cover, Screw And Trims

Courtesy of BMW OF NORTH AMERICA, INC.

Pull panel (1) towards rear and thereby release clips (2) and retainers (3).

Feed out trim (1).

Installation:

If necessary, replace faulty clips (2) and retainers (3).

Fig 2: Identifying Clips, Retainers And Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

After removal clips can be in position A.

For installation clips must be in position B.

Fig 3: Identifying Clips Position

Courtesy of BMW OF NORTH AMERICA, INC.