52 24 008 Removing and installing or replacing left or right side section on rear seat backrest
Necessary preliminary tasks:
- Remove REAR SEAT .
- Release rear-seat backrest and fold forward.
Removing rest side section:
- Unclip in middle.
- Lever out at top from belt cover.
- Lift out rest side section.
Installation:
Unlock clip (1) and pull forwards out of body.
Engage clip (1) in rest side section.
If necessary, replace faulty clip (1).
Installation:
Insert rest side section under backrest mount (2).
Insert plastic tab (1) of rest side section in backrest mount (2).
Pin must not be damaged.