64 11 835 Replacing actuator drive for left blending flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INSTRUMENT PANEL TRIM

NOTE: For purposes of clarity, illustration shows removed heating and air conditioning unit.

Unfasten screws (2).

Remove actuator drive (1).

Unlock plug connection (4) and disconnect.

Installation note:

Make sure actuator drive (1) is correctly seated in the guide (3).

Fig 1: Identifying Screw, Plug Connection, Actuator Drive And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating and air conditioning function
Flap motors
Readdress flap motors