51 41... Removing and installing/replacing switch cover on left or right front door trim panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks:

Remove COVER ON DOOR HANDLE

Use a suitable tool (1) to release latch mechanism (2) of switch cover (3) in direction of arrow.

Unclip switch cover (3) from door trim panel towards front/top.

Disconnect plug connection and remove switch cover (3).

Fig 1: Releasing Switch Cover Latch Mechanism Using Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Following parts must not be missing or damaged:

Catch
Retaining clips
Guides

Replacement:

Remount switch for power window (4) See 61 31 117 REMOVING AND INSTALLING/REPLACING POWER WINDOW SWITCH (DRIVER'S SIDE) or 61 31 118 REPLACING THE POWER WINDOWS REGULATOR ON THE PASSENGER'S SIDE .

Fig 2: Power Window Catch, Retaining Clips And Guides

Courtesy of BMW OF NORTH AMERICA, INC.