51 11... Punch overview holes in bumper panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

The holes are introduced additionally for the following versions.

PDC, inner
PDC, outer
Front camera
PMA and/or side view camera

Fig 1: Overview Of Bumper Panel Holes
Courtesy of BMW OF NORTH AMERICA, INC.

		Front camera.
Punching tool		2 359 747 Ø 17.6 mm
F15/F16	Front	x
	front M-Technik	x
	Rear
	rear M-Technik

		PDC	PMA	Side view camera	Front camera.
Punching tool		2 334 055 Ø 18 mm	2 334 055 Ø 18 mm	2 334 055 Ø 18 mm	2 359 747 Ø 17.6 mm
F20/F21	Front	x¹	x
	front M-Technik	x	x
	Rear	x
	rear M-Technik	x
F22/F23	Front	x	x
	front M-Technik	x	x
	Rear	x
	rear M-Technik	x
F30/F31	Front	x	x	x
	front M-Technik
	Rear	x
	rear M-Technik	x
F32/F33	Front	x	x	x
	front M-Technik
	Rear	x
	rear M-Technik
₁₎ Area (A) 2 334 059 Ø 32 mm, area (B) 2 334 055 Ø 18 mm