31 10 010 Removing and installing/replacing reinforcement plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without reinforcement plate is not permitted!
Driving without reinforcement plate is not permitted!
NOTE:
Two variants of the reinforcement plate are installed.
Necessary preliminary tasks:
- Remove underbody protection . See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION or 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .
Version 1:
Release screws (1).
Remove reinforcement plate (2).
Installation note:
Replace screws (1).
Tightening torque 31 10 4AZ .
Version 2:
Release screws (1).
Remove reinforcement plate (2).
Installation note:
Replace screws (1).
Tightening torque 31 10 4AZ .