51 47 490 Removing and installing/replacing front underbody protection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration only an example. Detail deviations (depending on engine version) are possible.

Release screws (1).

Tightening torque 51 75 1AZ .

Release all screws along line (2).

Tightening torque 51 75 1AZ .

Remove underbody protection (3).

Fig 1: Identifying Vehicle Underbody Protection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.