61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD

NOTE: Work shown on the F20 by way of example, deviations in detail are possible in other models.

Carefully lever out side cover (1) with special tool 00 9 323 .

Fig 1: Removing Side Cover Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock latch mechanisms (4) in direction of arrow.

Feed switch for front passenger airbag deactivation (2) out of side cover (3).

Installation note:

Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).

Fig 2: Releasing Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.