41 51... Adjust Door

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Do not damage adjoining body components.
Minor corrections (realignment work) are permitted if the existing adjustment options are not sufficient.

NOTE: Observe 41 00... BODY GAP DIMENSIONS .
The door must be provided with all add-on parts for correct adjustment.
Adjust screwed body components from rear to front.
The following illustrations are schematic representations and are to be applied to the relevant vehicle type.

Loosen striker and remove, If necessary.

Slacken screws for hinge (2) on door until door can still just be moved.

Tightening torque:

Front door: 41 51 2AZ
Rear door: 41 52 2AZ

Fig 1: Adjusting Door

Courtesy of BMW OF NORTH AMERICA, INC.

If adjustment range is not sufficient, slacken screws for hinges (1) on body.

NOTE: Screw connections only accessible from inside.

Tightening torque:

Front door: 41 51 3AZ
Rear door: 41 52 3AZ

Check that adjoining body components are flush in terms of height and correct if necessary.

NOTE: Height adjustment of door must not be influenced by striker.
When the door is closed, the striker must not touch or scrape against the door lock. Look out for scratch marks.

Fig 2: Checking Flushness Of Adjoining Body Components

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1) until striker can still just be moved.

Move striker sideways in order to adjust transition between door and adjoining bodywork parts.

Tightening torque:

Front door: 51 21 2AZ
Rear door: 51 22 2AZ

Fig 3: Adjusting Lock Striker

Courtesy of BMW OF NORTH AMERICA, INC.

After Installation note:

If the hinge is slackened on the body side, the area of the hinge must be sealed in a u-shape with sealant (1).

Tighten all bolts to specified torque.
Touch up unpainted surfaces in the appropriate color.
If necessary, adjust front door.

Fig 4: Identifying Door Hinge Sealant Application Area

Courtesy of BMW OF NORTH AMERICA, INC.