26 20 000 Removing and installing front propeller shaft
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
Necessary preliminary tasks:
- Remove UNDERBODY PROTECTION and retaining plate on left.
- Remove holder For exhaust system from gearbox.
Tightening torque 18 20 1AZ .
Release screws.
Tightening torque 26 11 7AZ .
Installation note:
Replace ZNS bolts.
Release screws.
Tightening torque 26 11 7AZ .
Remove propeller shaft.
Installation note:
Replace ZNS bolts.