11 22 000 Removing and installing/replacing flywheel (N63): Notes

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required

11 9 260

Necessary preliminary tasks:

Remove AUTOMATIC TRANSMISSION
Remove manual transmission
Remove clutch

Secure flywheel (1) with special tool 11 9 260 .

Fig 1: Securing Flywheel Using Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Automatic transmission:

Release flywheel screws in area (1).

Remove flywheel (2).

Installation note:

Clean threads on flywheel screws in crankshaft.

Flywheel (2) is secured with an alignment pin.

Fit flywheel (2).

Fit new flywheel bolts.

Tightening torque 11 22 1AZ .

Fig 2: Identifying Flywheel And Flywheel Screws Area

Courtesy of BMW OF NORTH AMERICA, INC.