61 61 100 Removing and installing/replacing both windscreen wiper arms

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After installation CHECK SETTING DIMENSION AND CONTACT ANGLE of the wiper arm.

Remove caps (1).

Release nuts underneath.

Tightening torque 61 61 2AZ .

Fig 1: Identifying Caps

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of breakage!
Do not bend wiper arm when removing.

Detach windscreen wiper arm with special tool 61 6 060.

Fig 2: Detaching Windscreen Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Danger of loosening!
Observe tightening specifications without fail.