LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (General Electrical System - Repair) >> Windscreen Wipers >> 61 61 010 Checking contact angle of windscreen wiper arms on front windscreen

61 61 010 Checking contact angle of windscreen wiper arms on front windscreen

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Precisely adjusting the contact angle of the wiper arms is crucial to determining wiping quality.
IMPORTANT: Wiper arms are only checked and not adjusted. SETTING DIMENSIONS 

Remove wiper blade (1) from wiper arm (2).

Journal (3) is the fixture point for special tool 61 6 100 .

Fig 1: Identifying Wiper Blade, Wiper Arm And Journal
G06895133Courtesy of BMW OF NORTH AMERICA, INC.

Slide special tool 61 6 100 onto journal (1).

Place special tool 61 6 100 on windscreen (2) and read off value in degrees on scale.

NOTE: LHD vehicles are covered by the scale range of 0 to -5 and RHD vehicles by the scale range of 0 to +5.
Fig 2: Sliding Special Tool (61 6 100) Onto Journal
G04727664Courtesy of BMW OF NORTH AMERICA, INC.