11 22 000 Removing and installing/replacing flywheel (N63)

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 9 260 .

Necessary preliminary tasks:

Remove automatic transmission. See REMOVING AUTOMATIC TRANSMISSION (GA6HP26Z) (MODEL YEARS 2009 THROUGH 2012) or REMOVING AUTOMATIC TRANSMISSION (GA8HP70Z) (MODEL YEARS 2013 THROUGH 2015) .
Remove manual transmission.
Remove clutch.

Secure flywheel (1) with special tool 11 9 260 .

Fig 1: Securing Flywheel Using Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Automatic transmission

Release flywheel screws in area (1).

Remove flywheel (2).

Installation note:

Clean threads on flywheel screws in crankshaft.

Flywheel (2) is secured with an alignment pin.

Fit flywheel (2).

Fit new flywheel bolts.

Tightening torque 11 22 1AZ .

Fig 2: Identifying Flywheel And Flywheel Screws Area