12 63 586 Replacing power distribution module (N20, N26)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Switch off ignition.
- Disconnect BATTERY NEGATIVE LEAD .
Unlock and pull off all connectors (1) from power distribution module.
Remove cover (2).
Release nut beneath it and set positive battery cable aside.
Tightening torque 12 52 7AZ .
Release lock (3) in direction of arrow.
Feed out and remove power distribution module.
Reassemble the vehicle.