Action in service
- Clear ECU fault memory? Ignition off? Ignition on for at least 1 minute
- If fault remains:
- 2.a. Check wiring harness DME - throttle valve (sum of throttle-valve voltages must equal 5 V)
- 2.b. Check to determine whether foreign objects/matter in the intake manifold or at the throttle valve are preventing the throttle valve from closing
- 2.c. Completely close the throttle valve by hand and measures the voltages on the two sensors (S1: 0.5 V +/- tolerance, S2: 4.5 V +/- tolerance)
- Replace throttle valve