Condition for fault identification

Test condition:

Learning routine for lower mechanical travel stop aborted owing to low battery voltage (< 10 V).

Potential problem source(s):

• Fault code entry is for information only
• Throttle-valve adaptation aborted in response to low onboard electrical system voltage

Terminal condition: Terminal 15

Voltage condition:

• Onboard electrical system voltage between 9 V and 16 V

Temperature condition:

• Engine warmed to normal temp, above 80 °C

Time condition:

• 30 sec. after Terminal 15 on

Other conditions:

• Engine on
• Vehicle velocity = 0 km/h