51 12 050 Removing and installing/replacing support for rear bumper panel

Necessary preliminary tasks

Release nut (1) from exhaust bracket on left or left and right.

Tightening torque 51 12 8AZ .

Fig 1: Identifying Exhaust Bracket Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Tightening torque 51 12 1AZ .

For trailer tow hitch only:

Disconnect plug connections of trailer tow hitch.

Remove support for rear bumper trim (4).

Replacement

Release expanding rivets (2).

Modify adapter (3).

Fig 2: Identifying Rear Bumper Trim, Expanding Rivet, Adapter And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

5112050 Removing and installing/replacing support for rear bumper panel