11 15 005 Removing tank ventilation line (N20)

Necessary preliminary tasks:

Release screw (1).

Tightening torque 11 42 6AZ .

Remove oil return line (2).

Installation note:

Replace O-ring.

Remove vent line (3).

Fig 1: Identifying Oil Return Line, Vent Line And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release retaining clip (3).

Remove vent line (2).

Installation note:

Make sure vent line (2) is in correct installation position.

Fig 2: Identifying Vent Line And Retaining Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.