51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left

Necessary preliminary tasks 

• Remove FRONT INNER ENTRANCE COVER STRIP 
• Remove TRIM PANEL FOR PEDAL ASSEMBLY .

Release screw (1).

Remove hood/bonnet actuating lever (2) in direction of arrow from panel (3).

Detach mucket  See 5170... FITTING SEALS  or 5171000 REMOVING AND INSTALLING/REPLACING SEAL ON FRONT DOOR, LEFT OR RIGHT  (2) in area of trim (5).

Release screw (1).

Unclip panel (5) in direction of arrow from retaining points (4).

If necessary, unlock plug connection of switch (3) and disconnect.

Remove trim (5).

Installation: 

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Preinstall clip (1) in trim (2).

Replacement 

Press catches and remove switch (3) in direction of arrow.