51 45 184 Removing and installing/replacing panel for pedals

Necessary preliminary tasks

Move driver's seat completely towards rear

ECE only:

Release screws (1).

Pull back trim for pedal assembly (2).

Disconnect and unlock all plug connections.

Remove trim for pedal assembly (2).

Installation:

Make sure trim for pedal assembly (2) is correctly seated on footwell air outlet above.

Fig 1: Pulling Back Trim For Pedal Assembly (ECE)

G06911913

Courtesy of BMW OF NORTH AMERICA, INC.

US only:

Release screws (1).

Pull back trim for pedal assembly (2).

Disconnect and unlock all plug connections.

Remove trim for pedal assembly (2).

Installation:

Make sure trim for pedal assembly (2) is correctly seated on footwell air outlet above.

Fig 2: Pulling Back Trim For Pedal Assembly (US)

G06911914

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Remove FOOTWELL LIGHT (1).

Remove SPEAKER (2).

Remove AERIAL (3).

Fig 3: Identifying Footwell Light, Speaker And Aerial

G06911915

Courtesy of BMW OF NORTH AMERICA, INC.