41 0 0 Contents Of Body Repair General Information

General notes

-> QUALITY STANDARD

-> WORKSHOP EQUIPMENT

Safety regulations

-> SAFETY AT WORK

-> INFORMATION ON HAZARDS

-> Information on VEHICLE PROTECTION

Materials

-> MATERIALS SCIENCE

-> USE OF MATERIALS in outer shell

-> EXPENDABLE MATERIALS

Handling components after an accident

-> ELECTRICAL SYSTEM , electronics and fibre optics

-> Passive safety See 41 00... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 72 12... PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT

-> CHASSIS, SUSPENSION AND STEERING

-> Retractable hardtop

-> Vehicles with Hybrid drive

Body dimensions

-> 41 00... FRAME ALIGNMENT CONTROL BODY DIMENSIONS

-> 41 00... BODY GAP DIMENSIONS .

Cavity sealing

-> Installation of shaped parts See 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) , 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED) or 41 00... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM

-> POSITION OF SHAPED PARTS

Vehicle identification number

-> VEHICLE IDENTIFICATION NUMBER, GENERAL

-> STAMPING VEHICLE IDENTIFICATION NUMBER

Repair techniques

-> REPAIR STAGE 1

Replacement of screwed-on components
Removing dents

-> REPAIR STAGE 2

Bonding and riveting
Welding using a MAG welder
without straightening bench

-> REPAIR STAGE 3

Bonding and riveting.
Welding using a spot welding system.
with a straightening bench.

Corrosion protection

-> GENERAL INFORMATION

Paint

-> GENERAL INFORMATION

-> INFORMATION/WARNING LABELS

-> Sectional painting See 99 00... INDIVIDUAL PARTS/PAINTING , 99 00... INTERIOR PAINTING or 99 00... SECTIONAL PAINTING