99 00... Individual parts/painting

Follow GENERAL INSTRUCTIONS ON PAINTING .

Rearview mirror.

Fig 1: Identifying Mirror

Courtesy of BMW OF NORTH AMERICA, INC.

Outside handle

Area specification applies to all paint stages.

Fig 2: Identifying Outside Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Roof

Area specification applies to all paint stages.

Fig 3: Identifying Roof

Courtesy of BMW OF NORTH AMERICA, INC.

Trim strip on roof frame

Area specification applies to all paint stages.

Fig 4: Identifying Trim Strip On Roof Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Trim on roof pillar

Area specification applies to all paint stages.

Fig 5: Identifying Trim On Roof Pillar

Courtesy of BMW OF NORTH AMERICA, INC.

Rear tail panel

Area specification applies to all paint stages.

Fig 6: Identifying Rear Tail Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Side wall, front

Area specification applies to all paint stages.

Fig 7: Identifying Front Side Wall

Courtesy of BMW OF NORTH AMERICA, INC.

Front door

Area specification applies to paint stage 1.

Fig 8: Identifying Front Door Panel (Paint Stage 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Front door

Area specification applies to paint stages 2 and 3.

Fig 9: Identifying Front Door Panel (Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Front door

Additional area specification inner plate for paint stages 2 and 3.

Fig 10: Identifying Front Door Panel (Inner Plate For Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear door

Area specification applies to paint stage 1.

Fig 11: Identifying Rear Door Panel (Paint Stage 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear door

Area specification applies to paint stages 2 and 3.

Fig 12: Identifying Rear Door Panel (Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear door

Additional area specification inner plate for paint stages 2 and 3.

Fig 13: Identifying Rear Door Panel (Inner Plate For Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Front lid

Area specification applies to all paint stages.

Additionally complete inner plate for paint stages 2 and 3.

Fig 14: Identifying Front Lid (Inner Plate For Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear lid

Area specification applies to paint stage 1.

Fig 15: Identifying Rear Lid (Paint Stage 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear lid

Area specification applies to paint stages 2 and 3.

Fig 16: Identifying Rear Lid (Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Rear lid

Additional area specification inner plate for paint stages 2 and 3.

Fig 17: Identifying Rear Lid (Inner Plate For Paint Stage 2 And 3)

Courtesy of BMW OF NORTH AMERICA, INC.

Flap for fuel filler neck

Area specification applies to all paint stages.

Additionally with inner plate for paint stages 2 and 3.

Fig 18: Identifying Flap For Fuel Filler Neck

Courtesy of BMW OF NORTH AMERICA, INC.

Panel, bumper, front

Area specification applies to all paint stages.

Fig 19: Identifying Front Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Panel, bumper, rear

Area specification applies to all paint stages.

Fig 20: Identifying Rear Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.