51 11 185 Removing and installing/replacing side ornamental grille in bumper trim

Necessary preliminary work:

Release catches (3).

Disconnect plug connections (1) and (2).

Remove trim grille (4).

Fig 1: Identifying Bumper Trim Grille, Catches And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Catches (1) and guides (2) must not be damaged.

Replacement:

Reinstall temperature sensor (2) and ultrasonic sensor (3).

Fig 2: Identifying Temperature Sensor And Ultrasonic Sensor

Courtesy of BMW OF NORTH AMERICA, INC.