51 11 050 Removing and installing/replacing support for front bumper trim

Necessary preliminary work:

Release screws (1) on left/right.

Tightening torque 51 11 4AZ

Remove support with shock absorber (2) by pulling forward.

Fig 1: Identifying Shock Absorber Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Adjust bracket (1) flush with support (2).

Fig 2: Identifying Bumper Trim Bracket And Support

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Reposition impact absorber.