61 35 015 Removing and installing (replacing) control unit for Car Access System

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

NOTE: For purposes of clarity, the illustration shows the bottom left instrument panel trim removed.

Unlock plug connections (1/2) and disconnect.

Release bolt (3).

Feed control unit for Car Access System (4) from bracket and remove.

Fig 1: Identifying CAS Bolt And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed guide (1) of control unit for Car Access System (2) correctly into associated mounting.

Fig 2: Identifying Guide And Control Unit For Car Access System

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: