17 11 000 Removing and installing radiator (N20)
WARNING:
Risk of scalding!
Only perform this repair work after engine has cooled down.
Only perform this repair work after engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Follow instructions for REPAIR WORK ON THE COOLING SYSTEM .
- Remove FAN COWL .
- Drain COOLANT .
- Unlock coolant hoses and detach.
Only vehicles with automatic transmissions:
Release bolt and detach hose (1).
Only vehicles with automatic transmissions:
Release bolt (1) and detach hose (2).
Release screws.
Tightening torque 17 10 1AZ .
Carefully feed out radiator (1) towards top and remove.
Reassemble the vehicle.