Condition for fault identification

Test condition:

The fault is recognized when the mixture for Bank 2 is too rich and the system drops below the adaptation limit (30 %) for 50 sec.

Potential problem source(s):

• Crankcase ventilation defective
• Defective intake-manifold pressure sensor before and behind throttle valve
• Defect in evaporative emissions valve
• Catalytic converter clogged
• Fuel injector defective

  Terminal condition: none

  Voltage condition:

• Electrical system voltage > 10 V

  Temperature condition:

• Ambient temperature > -10 °C

  Time condition:

• None

  Other conditions:

• Engine on