Condition for fault identification

Test condition:

The fault is recognized when the charge-air temperature is more than 15°C above the maximum of coolant and ambient temperature.

Potential problem source(s):

• Defect in wiring harness
• Charge-air temperature sensor defective
• Defective DME

  Terminal condition: Terminal 15

  Voltage condition:

• None

  Temperature condition:

• When the engine is started the ambient temperature must exceed -7.5 °C and be less than 35.3 °C,

  Time condition:

• Drive over 40 km/h more than 120 sec.

  Other conditions:

• None