51 16 366 Removing and installing/replacing right glovebox with housing
Necessary preliminary tasks:
- Remove UPPER INSTRUMENT PANEL STORAGE COMPARTMENT
- Remove trim for instrument panel, bottom left. See TRIM (ECE ONLY) or TRIM (US ONLY) .
- Remove USB INTERFACE CONNECTING SOCKET
F03 only:
Unlock and open flap (1), to enable a subsequent removal of radio predisposition line.
Unlock fuse carrier (3) and press back.
Release screw (1) on glovebox (2) at top.
Tightening torque 51 16 16AZ .
Release screws (1) on glovebox (2) at bottom.
Tightening torque 51 16 16AZ .
Remove glovebox (2) in direction of arrow.
Disconnect plug connection behind.
Replacement:
- Remove GLOVEBOX LIGHT