63 31 150 Removing and installing/replacing glovebox light

Lever out glove box light (1) in direction of arrow.

Unlock plug connection and disconnect.

Remove glove box light (1).

Replacement: 

• If necessary, remove bulb.

  Note BULB TYPE .

  Fig 1: Disconnecting Glove Box Light

  Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb holder (1) in direction of arrow and pull out of light (2).

Installation note: 

Make sure bulb holder (1) is correctly seated and engaged in light (2).

Remove bulb (1) from bulb holder (2) in direction of arrow.