51 72 000 Replacing edge protection for left or right front door
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary work:
- Remove TRIM FOR ROOF PILLAR AT FRONT
- Remove FOOTWELL SIDE TRIM PANEL ON A-PILLAR
- Remove REAR DOOR SILL COVER STRIP
- Remove TRIM PANEL FOR DOOR PILLAR (bottom)
Detach edge protection (1).
Installation note:
Install edge protection (1) starting in area "A".
When installed, the location of joint of edge protection (1) must be in area "B".
Pull off mounting cord starting in area "B".