72 11 294 Removing and installing/replacing lower belt (seat belt buckle), rear left
Necessary preliminary tasks
- Remove left REAR SEAT
Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use
Release screw (1).
Installation:
Replace screw (1).
Tightening torque 72 11 22AZ .
Remove seat belt buckle.
Installation:
Seat belt buckle is coded to prevent incorrect installation.