32 33 010 Removing And Installing/Replacing Sport Steering Wheel (Without Paddle Shift)

NOTE: Chassis/wheel alignment is not necessary after the steering wheel has been removed and installed or replaced.

Necessary preliminary work:

Move wheels/sport steering wheel into straight-ahead position.

Disconnect plug connection (1).

Release screw (2) and remove sport steering wheel.

Installation note:

Make sure connecting line(s) is/are correctly laid.

Tightening torque: 32 33 1AZ .

Fig 1: Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Version with steering wheel heating: Before fitting sport steering wheel on steering column, ensure correct cable routing.

Align sport steering wheel by way of marking (1) to steering column marking (2) and attach.

Fig 2: Aligning Steering Wheel And Colum Markings

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: