36 11 121 Removing And Installing/Replacing An RDC Trigger Transmitter (Front)

Necessary preliminary tasks 

• Partially detach front wheel arch trim  . See REMOVING AND INSTALLING/REPLACING FRONT LEFT OR RIGHT WHEEL ARCH COVER (FRONT SECTION)

Press through studs (1) of expander rivets towards rear.

Remove trigger transmitter (2).

Installation: 

If necessary, replace expander rivets.

After installation: 

• Carry out RESETTING OF RDC 
  Fig 1: Trigger Transmitter And Studs

  Courtesy of BMW OF NORTH AMERICA, INC.