11 61 368 Removing and installing/replacing rear left charge-air duct (N55)

Necessary preliminary tasks

Installation note:

Ensure locking clamps are correctly fitted.

Lock must engage.

Fig 1: Identifying Intake Silencer Housing Locking/Unlocking Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Disconnect plug connection (2).

Unlock snap fastener (3).

Unfasten hose clamp (4).

Installation note:

The snap fastener (3) must snap audibly into place!

Fig 2: Identifying Hose Clamp With Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.