13 90 500 Replacing tank vent valve (N52K)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Installation location:

Tank vent valve is fitted at bottom on intake air manifold.

Unlock plug (1) and remove.

Unlock hose (2) and detach.

Unlock hose (3) on intake manifold and detach.

Detach tank vent valve (4) from bracket and remove.

Fig 1: Identifying Plug, Hose And Vent Valve

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Read out fault memory of DME control unit.
Now clear the fault memory.