41 34 038 Replacing Outer Tail Panel Section: Notes

Read contents of BODY, GENERAL  and observe relevant procedures.

STRIP DOWN  vehicle

Following new body parts are required (refer to BMW Electronic Parts Catalogue):

• (1) Rear trim

Fig 1: Identifying Rear Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Open weld joints (1).

Open brazed joints (2).

Open spot weld bonding joints (3).

Remove rear trim.

Fig 2: Identifying Weld Joints Area And Brazed Joint Areas

Courtesy of BMW OF NORTH AMERICA, INC.